Copying on Postcards

Loading paper in Tray 1

Up to 20 postcards can be loaded into the Tray 1.

Load the original.
Tap [Copy] on the home screen.
Pull out Tray 1.
When loading postcards into the Tray 1, note the following points.
When loading curled postcards, uncurl the postcards as shown in the figure in advance.
Load postcards into the tray with the print side facing up, turning the short side to the right side of the tray (paper feed port).
Slide the Lateral Guide to fit the size of the loaded paper.
NOTICE
- Exercise care to ensure that there is no clearance between the Lateral Guide and paper.
Close Tray 1.
Tap [Env / Postcard] ([Envelope / 46], [Envelope / A6 Card]) from [Paper Size].
Select [Postcard] ([46], [A6 Card]) from [Env / Postcard] ([Envelope / 46], [Envelope / A6 Card]).
When [Postcard] ([46], [A6 Card]) is specified for the paper size, the paper type is automatically set to [Postcard].
Tap [OK].
Use the Start key to start copying.

Up to 20 postcards can be loaded into the Bypass Tray.

Load the original.
Tap [Copy] on the home screen.
When loading postcards into the Bypass Tray, note the following points.
When loading curled postcards, uncurl the postcards as shown in the figure in advance.
With the print side facing down, load postcards in the direction as shown in the figure.
Insert postcards into the tray until their edges are pressed against the back.
Slide the Lateral Guide to fit the size of the loaded paper.
On the Paper Setting screen, tap [Env / Postcard] ([Envelope / 46] or [Envelope / A6 Card]) in [Paper Size].
Select [Postcard] ([46], [A6 Card]) from [Env / Postcard] ([Envelope / 46], [Envelope / A6 Card]).
When [Postcard] ([46], [A6 Card]) is specified for the paper size, the paper type is automatically set to [Postcard].
Tap [OK].
Use the Start key to start copying.