Copying on Paper of a Custom Size

Copying on paper of a custom size

This section explains how to load custom-size paper into the Bypass Tray.

  1. Load the original.

  2. Display the Copy screen of classic style.

  3. Load custom size paper into the Bypass Tray with the print side facing down.

    The screen for selecting the paper type and paper size appears.

  4. In [Paper Size], tap [Custom Size].

  5. Enter the paper size in [Custom Size Settings], and close the screen.

    supplementary explanationTo specify a size registered in the memory, select the paper size recalled from [Registered Paper Sizes], and tap [Recall].

  6. Use the Start key to start copying.

Registering a custom size of paper in memory

  1. Display the Copy screen of classic style.

  2. Tap [Paper] and select the tray you can set the custom size to. Then, tap [Change Tray Setting].

  3. Tap [Paper Size].

  4. Load a single sheet to be measured on the Original Glass.

    NOTICE

    • If a sheet is loaded on the Original Glass, leave the Original Cover open.

  5. Use the Start key to start the size measuring process.

    When measurement is completed, the screen for confirming the measurement result is displayed.

  6. Tap [Store Size].

  7. In [Registered Paper Sizes], select the key of the memory to register data in.

    supplementary explanationTo change the name of the selected memory key, tap [Edit Name].

  8. Tap [OK].

  9. To set the detected size to the paper size, tap [OK].